Find in Library

The wave run-up height is a crucial design parameter that determines the crest height of a sea dike and is used for estimating the number of overtopping waves. Therefore, a reduction of the wave run-up height is generally aspired in the design of dikes, which can be achieved by mortar-grouted riprap revetments (MGRR). Although MGRRs are widely utilized revetments along the German North Sea coast, no investigations into the wave run-up height on this revetment type are available to date. Full-scale hydraulic model tests were hence conducted to investigate wave run-up heights on partially grouted and fully grouted MGRRs. The wave run-up was determined using 2D-LIDAR measurements, which were validated by video data. Partially grouted MGRRs, due to their roughness, porosity, and permeability, reduce wave run-up heights from 21% to 28%, and fully grouted MGRRs due to their roughness reduce wave run-up heights from 12% to 14% compared to smooth impermeable revetments. Influence factors have been determined for four widely used revetment configurations, which can now be used for design purposes. A comparison and subsequent discussion about the representation of the physics of wave run-up by different parameters is carried out with the results presented.