Find in Library

The Ordos Basin is rich in shale oil resources. The main targeted layers of blocks A83 and X233 are the Chang 7 member of the Yanchang Formation. Due to extremely low permeability, a fracturing technique was required to enhance oil recovery. However, after adopting the stimulated reservoir volume-fracturing technology, the post-fracturing production of the A83 block is significantly lower than that of the X233 block. For this problem, the dominating factors of productivity of the two blocks were analyzed using the Pearson correlation coefficient (PCC) and the Spearman rank correlation coefficient (SRCC), showing that the main reason for the lower production of the A83 block is its insufficient formation energy. To solve this problem, the CO₂ pre-pad energized fracturing method was proposed. To study the feasibility of CO₂ pre-pad energized fracturing in the A83 block, an integrated reservoir numerical simulation model of well A83-1 was established based on the idea of integration of geology and engineering. Additionally, the productions within five years after conventional volume fracturing and CO₂ pre-pad energized fracturing were compared. The results show that compared with conventional volume fracturing, the cumulative oil production of CO₂ pre-pad energized fracturing increases by 11.8%, and the water cut decreases by 16.5%. The research results can guide the subsequent reservoir reconstruction operation in the A83 block and provide new ideas for fracturing in the future.