Find in Library

High efficient nitrogen (N) application method and proper N management strategies can further reduce the losses and enhance N use efficiency. Field experiments were conducted in the 2015–2016 and 2016–2017 growing seasons to evaluate the effects of four fertigation frequencies treatments (FT-1: all the topdressing N was applied at the jointing stage; FT-2: 67% and 33% of the topdressing N was applied at the jointing and filling stages; FT-3: 33%, 50% and 17% of the topdressing N was applied at the regreening, jointing and filling stages; FT-4: 33%, 33%, 17% and 17% of the topdressing N were applied at the regreening, jointing, anthesis and filling stages) on wheat yield, water use efficiency (WUE), partial productivity of N fertilizer (PFPN) and N harvest index (NHI). In addition, one-time topdressing by surface broadcasting at the jointing stage was set up as a control (BC-1). The results showed that FT-3 and FT-4 supplied sufficient NO₃⁻-N in the 0–40 cm soil layer, which reduced the risk of soil NO₃⁻-N leaching to the deeper layers. FT-4 had the highest grain yield, WUE, PFPN and NHI, with average values of 9153.4 kg ha⁻¹, 2.1 kg m⁻³, 0.74 kg kg⁻¹ and 31.3 kg kg⁻¹, respectively, followed by these values corresponding to the FT-3 in two years. These findings suggest that topdressing N split with 3–4 times, that is to say applying approximately 16.7% of topdressing N in anthesis and filling stages, respectively by the center pivot fertigation method can significantly improve yield, WUE, PFPN and NHI.