Experimental Measurements and Numerical Simulation of H<sub>2</sub>S Generation during Cyclic Steam Stimulation Process of Offshore Heavy Oil from Bohai Bay, China

oleh: Taichao Wang, Renfeng Yang, Lijun Zhang, Wei Zheng, Yan Sun, Yuting Bai

Format: Article
Diterbitkan: MDPI AG 2022-07-01

Deskripsi

Cyclic steam stimulation (CSS) is successfully applied to increase heavy oil recovery in heavy oil reservoirs in Bohai Bay, China. However, during the CSS processes, hydrogen sulfide (H<sub>2</sub>S) was detected in some heavy oil reservoirs. The existing literature mainly focused on the H<sub>2</sub>S generation of onshore heavy oil. There is no concrete experimental data available, especially about the level of H<sub>2</sub>S generation during CSS of offshore heavy oil. In addition, there is still a lack of effective reaction kinetic models and numerical simulation methods to simulate H<sub>2</sub>S generation during the CSS of offshore heavy oil. Therefore, this paper presents a case study from Bohai Bay, China. First, the laboratory aquathermolysis tests were conducted to simulate the gases that are produced during the CSS processes of heavy oil. The effects of the reaction temperature and time on the H<sub>2</sub>S generation were studied. Then, a one-dimensional CSS experiment was performed to predict H<sub>2</sub>S generation under reservoir conditions. A kinetic model for the prediction of H<sub>2</sub>S generation during the CSS of heavy oil was presented. The developed model was calibrated with the experimental data of the one-dimensional CSS experiment at a temperature of 300 °C. Finally, a reservoir model was developed to predict H<sub>2</sub>S generation and investigate the effects of soaking time, steam quality, and steam injection volume on H<sub>2</sub>S generation during CSS processes. The results show that the H<sub>2</sub>S concentration increased from 0.77 ppm in the first cycle to 1.94 ppm in the eighth cycle during the one-dimensional CSS experiment. The average absolute error between the measured and simulated H<sub>2</sub>S production was 12.46%, indicating that the developed model can accurately predict H<sub>2</sub>S production. The H<sub>2</sub>S production increase with soaking time, steam quality, and steam injection volume due to the strengthened aquathermolysis reaction. Based on the reservoir simulation, the H<sub>2</sub>S production was predicted in the range of 228 m<sup>3</sup> to 2895 m<sup>3</sup> within the parameters of this study.