Find in Library

Shape-memory alloy titanium nickel (NiTi) fiber was introduced into continuous ceramic aluminum oxide (Al 2 O 3 ) fiber-reinforced titanium–titanium trialuminide metal–intermetallic laminated (CSMAFR-MIL) composite using vacuum hot pressing (HP) sintering method to improve the microstructure and mechanical properties of the composite. Scanning electron microscopy, energy-dispersive spectroscopy, and X-ray diffraction techniques were employed to characterize the microstructure of the novel CSMAFR-MIL composite. Besides, the tensile tests were carried out on continuous Al 2 O 3 fiber-reinforced Ti-Al metal–intermetallic laminated (CFR-MIL) composite and the CSMAFR-MIL composite to explore the influence of NiTi fiber additive on mechanical behavior of the CFR-MIL composite. The experimental results showed that the intermetallic layer including Al 3 Ti, Al 3 Ti 0.8 V 0.2 , Al 3 Ni intermetallics but without residual NiTi fiber was generated via the reactions of liquid Al with NiTi fiber and Ti foil during preparation. Moreover, owing to the addition of NiTi fiber, intermetallic centerline was prevented effectively to form in the CSMAFR-MIL composite. Moreover, the elemental diffusion occurred between the Al 2 O 3 fiber and the intermetallic, revealing that the metallurgical bonding was formed during the fabrication process. Furthermore, the CSMAFR-MIL composite possessed higher strength and superior ductility than those of CFR-MIL composite attributed to the microstructure optimization.