Find in Library

High pressure die casting copper is used to produce rotors for induction motors to improve efficiency. Experiments were carried out for a special “step-shape” casting with different step thicknesses. Based on the measured temperature inside the die, the interfacial heat transfer coefficient (IHTC) at the metal/die interface during vacuum die casting was evaluated by solving the inverse problem. The IHTC peak value was 4.5×103- 11×103 W·m-2·K-1 under the basic operation condition. The influences of casting pressure, fast shot speed, pouring temperature and initial die surface temperature on the IHTC peak values were investigated. Results show that a greater casting pressure and faster shot speed could only increase the IHTC peak values at the location close to the ingate. An increase of pouring temperature and/or initial die surface temperature significantly increases the IHTC peak values.