Find in Library

The withdrawal and lateral holding properties of three types of plywood with one stapled as well as one-row multi-stapled joints were studied and compared. The results show that variations in plywood density have a significant effect on withdrawal strength and a relatively small effect on lateral holding strength. At four staples, the withdrawal strength of the eucalyptus plywood with a density of 0.59 g/cm³ is 1821 N, which is 21% higher than that of poplar plywood with a density of 0.51 g/cm³ at 1498 N and 32% higher than that of eucalyptus/poplar composite plywood with a density of 0.53 g/cm³ at 1275 N. In terms of lateral holding strength, eucalyptus plywood has a lateral holding strength of 1603 N 12% lower than the 1807 N of eucalyptus/poplar composite plywood and 10% lower than the 1761 N of poplar plywood. As the number of staples increased from 1 to 4 in increments of 1, the withdrawal strength of eucalyptus plywood continued to increase, while the nodal strengths of the poplar plywood as well as eucalyptus/poplar composite plywood did not differ significantly between 3 and 4 staples, and there is a significant increase in the lateral holding strength for all three plywood nodes. Equations for predicting the withdrawal and lateral holding strengths of one-row multi-stapled joints were derived separately.