Hasil Pencarian - Stanislav Rusz

Perbaiki Hasil
  1. 1
    Residual Stresses Analysis Methodology During Cyclic Plastic Deformation Carbon Steel

    Residual Stresses Analysis Methodology During Cyclic Plastic Deformation Carbon Steel oleh Vladislav OCHODEK, Stanislav RUSZ

    Diterbitkan 2016-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Effects of Built Direction and Deformation Temperature on the Grain Refinement of 3D Printed AlSi10Mg Alloy Processed by Equal Channel Angular Pressing (ECAP)

    Effects of Built Direction and Deformation Temperature on the Grain Refinement of 3D Printed AlSi10Mg Alloy Processed by Equal Channel Angular Pressing (ECAP) oleh Przemysław Snopiński, Krzysztof Matus, Ondřej Hilšer, Stanislav Rusz

    Diterbitkan 2023-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys

    Influence of Severe Plastic Deformation on Mechanical Properties and Structure of Aluminium Alloys oleh Ondřej Hilšer, Stanislav Rusz, Radek čada, Michal Salajka, Jan Dutkiewicz

    Diterbitkan 2016-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Use of Numerical Simulation at Optimisation of Technological Processes of Cold Bulk Forming

    Use of Numerical Simulation at Optimisation of Technological Processes of Cold Bulk Forming oleh Stanislav RUSZ, Stanislav TYLŠAR, Jan KEDROŇ, Michal SALAJKA, Tomáš BRUMAR

    Diterbitkan 2012-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Effect of Multi-Variant Thermal Treatment on Microstructure Evolution and Mechanical Properties of AlSi10Mg Processed by Direct Metal Laser Sintering and Casting

    Effect of Multi-Variant Thermal Treatment on Microstructure Evolution and Mechanical Properties of AlSi10Mg Processed by Direct Metal Laser Sintering and Casting oleh Krzysztof Żaba, Lechosław Tuz, Piotr Noga, Stanislav Rusz, Rostislav Zabystrzan

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Full-Field Temperature Measurement of Stainless Steel Specimens Subjected to Uniaxial Tensile Loading at Various Strain Rates

    Full-Field Temperature Measurement of Stainless Steel Specimens Subjected to Uniaxial Tensile Loading at Various Strain Rates oleh Krzysztof Żaba, Tomasz Trzepieciński, Stanislav Rusz, Sandra Puchlerska, Maciej Balcerzak

    Diterbitkan 2021-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    On various multi-layer perceptron and radial basis function based artificial neural networks in the process of a hot flow curve description

    On various multi-layer perceptron and radial basis function based artificial neural networks in the process of a hot flow curve description oleh Petr Opěla, Ivo Schindler, Petr Kawulok, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil

    Diterbitkan 2021-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    An Investigation into Sheet-Inconel 718 Forming with Flexible and Metal Tools—Simulation and Experiment

    An Investigation into Sheet-Inconel 718 Forming with Flexible and Metal Tools—Simulation and Experiment oleh Maciej Balcerzak, Stanislav Rusz, Radek Čada, Martin Pastrňák, Ondřej Hilšer, Miroslav Greger

    Diterbitkan 2024-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Author Correction: Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy

    Author Correction: Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy oleh Przemysław Snopiński, Michal Kotoul, Jindřich Petruška, Stanislav Rusz, Krzysztof Żaba, Ondřej Hilšer

    Diterbitkan 2023-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    On the Zener–Hollomon Parameter, Multi-Layer Perceptron and Multivariate Polynomials in the Struggle for the Peak and Steady-State Description

    On the Zener–Hollomon Parameter, Multi-Layer Perceptron and Multivariate Polynomials in the Struggle for the Peak and Steady-State Description oleh Petr Opěla, Petr Kawulok, Ivo Schindler, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil

    Diterbitkan 2020-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Flow Stress and Hot Deformation Activation Energy of 6082 Aluminium Alloy Influenced by Initial Structural State

    Flow Stress and Hot Deformation Activation Energy of 6082 Aluminium Alloy Influenced by Initial Structural State oleh Ivo Schindler, Petr Kawulok, Vladivoj Očenášek, Petr Opěla, Rostislav Kawulok, Stanislav Rusz

    Diterbitkan 2019-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING

    SUPERPLASTIC DEFORMATION OF TWO PHASE MgLiAl ALLOY AFTER TCAP PRESSING oleh Jan Dutkiewicz, Stanislav Rusz, Dariusz Kuc, Ondrej Hilser, Paweł Pałka, Grzegorz Boczkal

    Diterbitkan 2017-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Shallow and deep learning of an artificial neural network model describing a hot flow stress Evolution: A comparative study

    Shallow and deep learning of an artificial neural network model describing a hot flow stress Evolution: A comparative study oleh Petr Opěla, Ivo Schindler, Petr Kawulok, Rostislav Kawulok, Stanislav Rusz, Michal Sauer

    Diterbitkan 2022-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy

    Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy oleh Przemysław Snopiński, Michal Kotoul, Jindřich Petruška, Stanislav Rusz, Krzysztof Żaba, Ondřej Hilšer

    Diterbitkan 2023-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    STRUCTURE AND PROPERTIES OF AZ31 MAGNESIUM ALLOY AFTER COMBINATION OF HOT EXTRUSION AND ECAP

    STRUCTURE AND PROPERTIES OF AZ31 MAGNESIUM ALLOY AFTER COMBINATION OF HOT EXTRUSION AND ECAP oleh Ondřej Hilšer, Stanislav Rusz, Wojciech Maziarz, Jan Dutkiewicz, Tomasz Tański, Przemysław Snopiński, Jan Džugan

    Diterbitkan 2017-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Evolution of Microstructure, Texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP)

    Evolution of Microstructure, Texture and Corrosion Properties of Additively Manufactured AlSi10Mg Alloy Subjected to Equal Channel Angular Pressing (ECAP) oleh Przemysław Snopiński, Anna Woźniak, Dariusz Łukowiec, Krzysztof Matus, Tomasz Tański, Stanislav Rusz, Ondřej Hilšer

    Diterbitkan 2022-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Hot Deformation Behavior of Non-Alloyed Carbon Steels

    Hot Deformation Behavior of Non-Alloyed Carbon Steels oleh Petr Kawulok, Petr Opěla, Ivo Schindler, Rostislav Kawulok, Stanislav Rusz, Michal Sauer, Kateřina Konečná

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation

    Study of the Microstructure, Tensile Properties and Hardness of AZ61 Magnesium Alloy Subjected to Severe Plastic Deformation oleh Ondřej Hilšer, Stanislav Rusz, Pavel Szkandera, Lubomír Čížek, Martin Kraus, Jan Džugan, Wojciech Maziarz

    Diterbitkan 2018-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    Correlation among the Power Dissipation Efficiency, Flow Stress Course, and Activation Energy Evolution in Cr-Mo Low-Alloyed Steel

    Correlation among the Power Dissipation Efficiency, Flow Stress Course, and Activation Energy Evolution in Cr-Mo Low-Alloyed Steel oleh Petr Opěla, Ivo Schindler, Petr Kawulok, Rostislav Kawulok, Stanislav Rusz, Horymír Navrátil, Radek Jurča

    Diterbitkan 2020-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Analysis of the Microstructure Development of Nb-Microalloyed Steel during Rolling on a Heavy-Section Mill

    Analysis of the Microstructure Development of Nb-Microalloyed Steel during Rolling on a Heavy-Section Mill oleh Michal Sauer, Richard Fabík, Ivo Schindler, Petr Kawulok, Petr Opěla, Rostislav Kawulok, Vlastimil Vodárek, Stanislav Rusz

    Diterbitkan 2022-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: