Hasil Pencarian - Muthuramalingam Thangaraj

  • Menampilkan 1 - 15 hasil dari 15
Perbaiki Hasil
  1. 1
    Standalone and Interconnected Analysis of an Independent Accumulator Pressure Compressibility Hydro-Pneumatic Suspension for the Four-Axle Heavy Truck

    Standalone and Interconnected Analysis of an Independent Accumulator Pressure Compressibility Hydro-Pneumatic Suspension for the Four-Axle Heavy Truck oleh Thiyagarajan Jayaraman, Muthuramalingam Thangaraj

    Diterbitkan 2023-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Evaluation of the Feasibility of the Prediction of the Surface Morphologiesof AWJ-Milled Pockets by Statistical Methods Based on Multiple Roughness Indicators

    Evaluation of the Feasibility of the Prediction of the Surface Morphologiesof AWJ-Milled Pockets by Statistical Methods Based on Multiple Roughness Indicators oleh Nikolaos E. Karkalos, Muthuramalingam Thangaraj, Panagiotis Karmiris-Obratański

    Diterbitkan 2024-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Influence of Additive Manufactured Stainless Steel Tool Electrode on Machinability of Beta Titanium Alloy

    Influence of Additive Manufactured Stainless Steel Tool Electrode on Machinability of Beta Titanium Alloy oleh Ragavanantham Shanmugam, Monsuru Ramoni, Geethapriyan Thangamani, Muthuramalingam Thangaraj

    Diterbitkan 2021-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Effect of Age-Hardening Temperature on Mechanical and Wear Behavior of Furnace-Cooled Al7075-Tungsten Carbide Composite

    Effect of Age-Hardening Temperature on Mechanical and Wear Behavior of Furnace-Cooled Al7075-Tungsten Carbide Composite oleh Srinivasan Rajaram, Thirugnanam Subbiah, Parammasivam Kanjikovil Mahali, Muthuramalingam Thangaraj

    Diterbitkan 2022-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Optimization of Abrasive Water Jet Machining of SiC Reinforced Aluminum Alloy Based Metal Matrix Composites Using Taguchi–DEAR Technique

    Optimization of Abrasive Water Jet Machining of SiC Reinforced Aluminum Alloy Based Metal Matrix Composites Using Taguchi–DEAR Technique oleh Muthuramalingam Thangaraj, Mahmoud Ahmadein, Naser A. Alsaleh, Ammar H. Elsheikh

    Diterbitkan 2021-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Influence of Adaptive Gap Control Mechanism and Tool Electrodes on Machining Titanium (Ti-6Al-4V) Alloy in EDM Process

    Influence of Adaptive Gap Control Mechanism and Tool Electrodes on Machining Titanium (Ti-6Al-4V) Alloy in EDM Process oleh Shoufa Liu, Muthuramalingam Thangaraj, Khaja Moiduddin, Abdulrahman M. Al-Ahmari

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Advanced Machining Technology for Modern Engineering Materials

    Advanced Machining Technology for Modern Engineering Materials oleh Panagiotis Karmiris-Obratanski, Muthuramalingam Thangaraj, Beata Leszczyńska-Madej, Angelos P. Markopoulos

    Diterbitkan 2024-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Enhancing the Surface Quality of Micro Titanium Alloy Specimen in WEDM Process by Adopting TGRA-Based Optimization

    Enhancing the Surface Quality of Micro Titanium Alloy Specimen in WEDM Process by Adopting TGRA-Based Optimization oleh Muthuramalingam Thangaraj, Ramamurthy Annamalai, Khaja Moiduddin, Mohammed Alkindi, Sundar Ramalingam, Osama Alghamdi

    Diterbitkan 2020-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Design of Real-Time Extremum-Seeking Controller-Based Modelling for Optimizing <i>MRR</i> in Low Power EDM

    Design of Real-Time Extremum-Seeking Controller-Based Modelling for Optimizing <i>MRR</i> in Low Power EDM oleh Mohamed Rabik Mohamed Ismail, Muthuramalingam Thangaraj, Panagiotis Karmiris-Obratański, Emmanouil Papazoglou, Nikolaos Karkalos

    Diterbitkan 2023-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Multiobjective Optimization of Heat-Treated Copper Tool Electrode on EMM Process Using Artificial Bee Colony (ABC) Algorithm

    Multiobjective Optimization of Heat-Treated Copper Tool Electrode on EMM Process Using Artificial Bee Colony (ABC) Algorithm oleh Geethapriyan Thangamani, Muthuramalingam Thangaraj, Khaja Moiduddin, Hisham Alkhalefah, Sivakumar Mahalingam, Panagiotis Karmiris-Obratański

    Diterbitkan 2022-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Performance Analysis of Electrochemical Micro Machining of Titanium (Ti-6Al-4V) Alloy under Different Electrolytes Concentrations

    Performance Analysis of Electrochemical Micro Machining of Titanium (Ti-6Al-4V) Alloy under Different Electrolytes Concentrations oleh Geethapriyan Thangamani, Muthuramalingam Thangaraj, Khaja Moiduddin, Syed Hammad Mian, Hisham Alkhalefah, Usama Umer

    Diterbitkan 2021-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Design, Fabrication, and Optimization of a Printed Ag Nanoparticle-Based Flexible Capacitive Sensor for Automotive IVI Bezel Display Applications

    Design, Fabrication, and Optimization of a Printed Ag Nanoparticle-Based Flexible Capacitive Sensor for Automotive IVI Bezel Display Applications oleh Srinivasan Palanisamy, Muthuramalingam Thangaraj, Khaja Moiduddin, Hisham Alkhalefah, Panagiotis Karmiris-Obratański, Cheng Siong Chin

    Diterbitkan 2023-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Optimizing the Surface Parameters of Titanium (Ti-6Al-4V) Alloy Specimens Using WEDM Process Based on Taguchi-DEAR Algorithm

    Optimizing the Surface Parameters of Titanium (Ti-6Al-4V) Alloy Specimens Using WEDM Process Based on Taguchi-DEAR Algorithm oleh Muthuramalingam Thangaraj, Khaja Moiduddin, Ramamurthy Annamalai, Syed Hammad Mian, Zeyad Ammar Almutairi, Ryszard Machnik

    Diterbitkan 2024-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process

    Performance Evaluation of Input Power of Diode Laser on Machined Leather Specimen in Laser Beam Cutting Process oleh Tamer Khalaf, Muthuramalingam Thangaraj, Khaja Moiduddin, Vasanth Swaminathan, Syed Hammad Mian, Faraz Ahmed, Mohamed Kamaleldin Aboudaif

    Diterbitkan 2023-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Analysis of Carbon Formation on Machined Leather Specimen Using FTIR Technique in Laser Diode Assisted Cutting Process

    Analysis of Carbon Formation on Machined Leather Specimen Using FTIR Technique in Laser Diode Assisted Cutting Process oleh Vasanth Swaminathan, Muthuramalingam Thangaraj, Edwin George Joseph, Suhaib Sulfikar Khadar, Joel Philip Saji, Panagiotis Karmiris-Obratański

    Diterbitkan 2022-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: