Hasil Pencarian - Mustafa Kuntoğlu

  • Menampilkan 1 - 19 hasil dari 19
Perbaiki Hasil
  1. 1
    Evaluation of the Role of Dry and MQL Regimes on Machining and Sustainability Index of Strenx 900 Steel

    Evaluation of the Role of Dry and MQL Regimes on Machining and Sustainability Index of Strenx 900 Steel oleh Abdullah Aslan, Emin Salur, Mustafa Kuntoğlu

    Diterbitkan 2022-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Machinability Investigations Based on Tool Wear, Surface Roughness, Cutting Temperature, Chip Morphology and Material Removal Rate during Dry and MQL-Assisted Milling of Nimax Mold Steel

    Machinability Investigations Based on Tool Wear, Surface Roughness, Cutting Temperature, Chip Morphology and Material Removal Rate during Dry and MQL-Assisted Milling of Nimax Mold... oleh Rüstem Binali, Havva Demirpolat, Mustafa Kuntoğlu, Hacı Sağlam

    Diterbitkan 2023-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Different Aspects of Machinability in Turning of AISI 304 Stainless Steel: A Sustainable Approach with MQL Technology

    Different Aspects of Machinability in Turning of AISI 304 Stainless Steel: A Sustainable Approach with MQL Technology oleh Rüstem Binali, Havva Demirpolat, Mustafa Kuntoğlu, Emin Salur

    Diterbitkan 2023-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    The Effects of MQL and Dry Environments on Tool Wear, Cutting Temperature, and Power Consumption during End Milling of AISI 1040 Steel

    The Effects of MQL and Dry Environments on Tool Wear, Cutting Temperature, and Power Consumption during End Milling of AISI 1040 Steel oleh Emin Salur, Mustafa Kuntoğlu, Abdullah Aslan, Danil Yurievich Pimenov

    Diterbitkan 2021-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel

    A Comprehensive Analysis of Surface Roughness, Vibration, and Acoustic Emissions Based on Machine Learning during Hard Turning of AISI 4140 Steel oleh İlhan Asiltürk, Mustafa Kuntoğlu, Rüstem Binali, Harun Akkuş, Emin Salur

    Diterbitkan 2023-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Energy Saving by Parametric Optimization and Advanced Lubri-Cooling Techniques in the Machining of Composites and Superalloys: A Systematic Review

    Energy Saving by Parametric Optimization and Advanced Lubri-Cooling Techniques in the Machining of Composites and Superalloys: A Systematic Review oleh Rüstem Binali, Abhishek Dhananjay Patange, Mustafa Kuntoğlu, Tadeusz Mikolajczyk, Emin Salur

    Diterbitkan 2022-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Research on Using an Unconventional Tool for Increasing Tool Life by Selective Exchange of Worn Cutting Edge

    Research on Using an Unconventional Tool for Increasing Tool Life by Selective Exchange of Worn Cutting Edge oleh Tadeusz Mikolajczyk, Tomasz Paczkowski, Mustafa Kuntoglu, Abhishek D. Patange, Rüstem Binali

    Diterbitkan 2022-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel

    Modeling of Cutting Parameters and Tool Geometry for Multi-Criteria Optimization of Surface Roughness and Vibration via Response Surface Methodology in Turning of AISI 5140 Steel oleh Mustafa Kuntoğlu, Abdullah Aslan, Danil Yurievich Pimenov, Khaled Giasin, Tadeusz Mikolajczyk, Shubham Sharma

    Diterbitkan 2020-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140

    Optimization and Analysis of Surface Roughness, Flank Wear and 5 Different Sensorial Data via Tool Condition Monitoring System in Turning of AISI 5140 oleh Mustafa Kuntoğlu, Abdullah Aslan, Hacı Sağlam, Danil Yurievich Pimenov, Khaled Giasin, Tadeusz Mikolajczyk

    Diterbitkan 2020-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Investigation of the Effects of Cooling and Lubricating Strategies on Tribological Characteristics in Machining of Hybrid Composites

    Investigation of the Effects of Cooling and Lubricating Strategies on Tribological Characteristics in Machining of Hybrid Composites oleh Serhat Şap, Üsame Ali Usca, Mahir Uzun, Mustafa Kuntoğlu, Emin Salur, Danil Yurievich Pimenov

    Diterbitkan 2022-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy

    Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy oleh Üsame Ali Usca, Mahir Uzun, Mustafa Kuntoğlu, Serhat Şap, Khaled Giasin, Danil Yurievich Pimenov

    Diterbitkan 2021-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites

    Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites oleh Üsame Ali Usca, Mahir Uzun, Serhat Şap, Mustafa Kuntoğlu, Khaled Giasin, Danil Yu Pimenov, Szymon Wojciechowski

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Parametric Optimization for Cutting Forces and Material Removal Rate in the Turning of AISI 5140

    Parametric Optimization for Cutting Forces and Material Removal Rate in the Turning of AISI 5140 oleh Mustafa Kuntoğlu, Osman Acar, Munish Kumar Gupta, Hacı Sağlam, Murat Sarikaya, Khaled Giasin, Danil Yurievich Pimenov

    Diterbitkan 2021-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Parametric Optimization for Improving the Machining Process of Cu/Mo-SiC<sub>P</sub> Composites Produced by Powder Metallurgy

    Parametric Optimization for Improving the Machining Process of Cu/Mo-SiC<sub>P</sub> Composites Produced by Powder Metallurgy oleh Emine Şap, Üsame Ali Usca, Munish Kumar Gupta, Mustafa Kuntoğlu, Murat Sarıkaya, Danil Yurievich Pimenov, Mozammel Mia

    Diterbitkan 2021-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing

    Optimization Study on Surface Roughness and Tribological Behavior of Recycled Cast Iron Reinforced Bronze MMCs Produced by Hot Pressing oleh Aydın Güneş, Ömer Sinan Şahin, Hayrettin Düzcükoğlu, Emin Salur, Abdullah Aslan, Mustafa Kuntoğlu, Khaled Giasin, Danil Yurievich Pimenov

    Diterbitkan 2021-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste

    Towards Analysis and Optimization for Contact Zone Temperature Changes and Specific Wear Rate of Metal Matrix Composite Materials Produced from Recycled Waste oleh Aydın Güneş, Emin Salur, Abdullah Aslan, Mustafa Kuntoğlu, Khaled Giasin, Danil Yurievich Pimenov, Hayrettin Düzcükoğlu, Ömer Sinan Şahin

    Diterbitkan 2021-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    A short review on thermal treatments of Titanium &amp; Nickel based alloys processed by selective laser melting

    A short review on thermal treatments of Titanium &amp; Nickel based alloys processed by selective laser melting oleh Mehmet Erdi Korkmaz, Munish Kumar Gupta, Saad Waqar, Mustafa Kuntoğlu, Grzegorz M. Krolczyk, Radosław W. Maruda, Danil Yu. Pimenov

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Estimation, optimization and analysis based investigation of the energy consumption in machinability of ceramic-based metal matrix composite materials

    Estimation, optimization and analysis based investigation of the energy consumption in machinability of ceramic-based metal matrix composite materials oleh Üsame Ali Usca, Serhat Şap, Mahir Uzun, Mustafa Kuntoğlu, Emin Salur, Abdülkerim Karabiber, Danil Yu Pimenov, Khaled Giasin, Szymon Wojciechowski

    Diterbitkan 2022-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends

    A Review of Indirect Tool Condition Monitoring Systems and Decision-Making Methods in Turning: Critical Analysis and Trends oleh Mustafa Kuntoğlu, Abdullah Aslan, Danil Yurievich Pimenov, Üsame Ali Usca, Emin Salur, Munish Kumar Gupta, Tadeusz Mikolajczyk, Khaled Giasin, Wojciech Kapłonek, Shubham Sharma

    Diterbitkan 2020-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: