Hasil Pencarian - Marco Antonio Bottino

Perbaiki Hasil
  1. 1
    Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic Avaliação da resistência ao cisalhamento da união entre duas ligas a base de CoCr e uma cerâmica

    Evaluation of the shear bond strength of the union between two CoCr-alloys and a dental ceramic Avaliação da resistência ao cisalhamento da união entre duas ligas a base de CoCr e... oleh Mariana Pretti, Edson Hilgert, Marco Antônio Bottino, Rander Pereira Avelar

    Diterbitkan 2004-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Marginal fit of electroformed copings before and after the coction of the porcelain

    Marginal fit of electroformed copings before and after the coction of the porcelain oleh Leonardo Buso, Edson Hilgert, Maximiliano Piero Neisser, Marco Antonio Bottino

    Diterbitkan 2015-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Evaluation of marginal adaptation of ceramic crowns depending on the marginal design and the addition of ceramic

    Evaluation of marginal adaptation of ceramic crowns depending on the marginal design and the addition of ceramic oleh Edson Hilgert, Leonardo Buso, Maximiliano Piero Neisser, Marco Antonio Bottino

    Diterbitkan 2015-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding Adaptação de copings de ritânio ao implante, construídos sobre pilares UCLA por duas técnicas: fundição e fundição com soldagem de bordo laser

    The fitness of copings constructed over UCLA abutments and the implant, constructed by different techniques: casting and casting with laser welding Adaptação de copings de ritânio... oleh Elza Maria Valadares da Costa, Luciana Satie Hoçoya, Marco Antônio Bottino

    Diterbitkan 2004-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics Adesão a uma cerâmica aluminizada densamente sinterizada e a uma cerâmica a base de alumina / zircônia infiltrada de vidro

    Bonding to densely sintered alumina- and glass infiltrated aluminum / zirconium-based ceramics Adesão a uma cerâmica aluminizada densamente sinterizada e a uma cerâmica a base de a... oleh Luiz Felipe Valandro, André Mallmann, Alvaro Della Bona, Marco Antonio Bottino

    Diterbitkan 2005-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Multiple-unit implant frames: one-piece casting vs. laser welding and brazing Sobre estruturas de implantes múltiplos: fundição em monobloco versus soldagem a laser e brasagem

    Multiple-unit implant frames: one-piece casting vs. laser welding and brazing Sobre estruturas de implantes múltiplos: fundição em monobloco versus soldagem a laser e brasagem oleh Elza Maria Valadares da Costa, Maximiliano Piero Neisser, Marco Antônio Bottino

    Diterbitkan 2004-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Evaluation of shear bond strength and shear stress on zirconia reinforced lithium silicate and high translucency zirconia

    Evaluation of shear bond strength and shear stress on zirconia reinforced lithium silicate and high translucency zirconia oleh Amanda Maria de Oliveira Dal Piva, João Paulo Mendes Tribst, Marco Antonio Bottino

    Diterbitkan 2018-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Bond characteristics of porcelain fused to cast and milled titanium

    Bond characteristics of porcelain fused to cast and milled titanium oleh Karina Andrea Novaes Olivieri, Maximiliano Piero Neisser, Marco Antônio Bottino, Milton Edson Miranda

    Diterbitkan 2015-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Mechanical properties and micro structural analysis of a NiCr alloy cast under different temperatures

    Mechanical properties and micro structural analysis of a NiCr alloy cast under different temperatures oleh Karina Andrea Novaes Olivieri, Maximiliano P. Neisser, Paulo C. R. Souza, Marco Antônio Bottino

    Diterbitkan 2015-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent

    Effect of composite surface treatment and aging on the bond strength between a core build-up composite and a luting agent oleh Caroline COTES, Mayra CARDOSO, Renata Marques de MELO, Luiz Felipe VALANDRO, Marco Antonio BOTTINO

    Diterbitkan 2015-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Effect of Antirotational Two-Piece Titanium Base on the Vertical Misfit, Fatigue Behavior, Stress Concentration, and Fracture Load of Implant-Supported Zirconia Crowns

    Effect of Antirotational Two-Piece Titanium Base on the Vertical Misfit, Fatigue Behavior, Stress Concentration, and Fracture Load of Implant-Supported Zirconia Crowns oleh Dario Adolfi, Manassés Tercio Vieira Grangeiro, Pietro Ausiello, Marco Antonio Bottino, João Paulo Mendes Tribst

    Diterbitkan 2023-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic

    Effect of grinding and heat treatment on the mechanical behavior of zirconia ceramic oleh Gabriela Freitas RAMOS, Gabriel Kalil Rocha PEREIRA, Marina AMARAL, Luiz Felipe VALANDRO, Marco Antonio BOTTINO

    Diterbitkan 2016-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    From Denture to the Final Implant-Supported Prosthesis Using a Full-Digital Protocol: A Dental Technique

    From Denture to the Final Implant-Supported Prosthesis Using a Full-Digital Protocol: A Dental Technique oleh Francisco Fernando Todescan, Marcos Masayuki Hayashi, Luiz Roberto Giugni, Marco Antonio Bottino, João Paulo Mendes Tribst

    Diterbitkan 2021-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    High temperature dimensional alterations of implant supported frameworks

    High temperature dimensional alterations of implant supported frameworks oleh Diego Klee Vasconcellos, Antonio Carlos Cardoso, Marco Antonio Bottino, Ricardo de Souza Magini, Wilson Andriani Jr

    Diterbitkan 2015-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes

    Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes oleh Roberto Messias BEZERRA, Paulo Cézar Rioli Duarte de SOUZA, Ivan RAMIRES, Marco Antônio BOTTINO, Antônio Carlos GUASTALDI

    Diterbitkan 2018-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement Efeito da ciclagem térmica sobre a resistência de união entre uma cerâmica infiltrada com vidro e um cimento resinoso

    Effect of thermocycling on the bond strength of a glass-infiltrated ceramic and a resin luting cement Efeito da ciclagem térmica sobre a resistência de união entre uma cerâmica inf... oleh Osvaldo Daniel Andreatta Filho, Marco Antonio Bottino, Renato Sussumu Nishioka, Luiz Felipe Valandro, Fabíola Pessoa Pereira Leite

    Diterbitkan 2003-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Influência do agente de união na resistência ao cisalhamento da interface titânio/polímero de vidro Bonding agent influence on shear bond strength of titanium/polyglass interface

    Influência do agente de união na resistência ao cisalhamento da interface titânio/polímero de vidro Bonding agent influence on shear bond strength of titanium/polyglass interface... oleh Denise Kanashiro Oyafuso, Marco Antonio Bottino, Marcos Koiti Itinoche, Anna Paula Nasraui, Elza Maria Valadares da Costa

    Diterbitkan 2003-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Effect of Restorative Material on Mechanical Response of Provisional Endocrowns: A 3D—FEA Study

    Effect of Restorative Material on Mechanical Response of Provisional Endocrowns: A 3D—FEA Study oleh João Paulo Mendes Tribst, Alexandre Luiz Souto Borges, Laís Regiane Silva-Concílio, Marco Antonio Bottino, Mutlu Özcan

    Diterbitkan 2021-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia

    Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia oleh Rodrigo Diniz PRADO, Gabriel Kalil Rocha PEREIRA, Marco Antonio BOTTINO, Renata Marques de MELO, Luiz Felipe VALANDRO

    Diterbitkan 2017-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Effect of implant number and height on the biomechanics of full arch prosthesis

    Effect of implant number and height on the biomechanics of full arch prosthesis oleh João Paulo Mendes Tribst, Amanda Maria de Oliveira Dal Piva, Alexandre Luiz Souto Borges, Marco Antonio Bottino

    Diterbitkan 2018-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: