Hasil Pencarian - Ludwig Cardon

Perbaiki Hasil
  1. 1
    Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering

    Processing of Syndiotactic Polystyrene to Microspheres for Part Manufacturing through Selective Laser Sintering oleh Nicolas Mys, An Verberckmoes, Ludwig Cardon

    Diterbitkan 2016-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene

    The Effect of Multiple Extrusions on the Properties of Montmorillonite Filled Polypropylene oleh Laurens Delva, Kim Ragaert, Joris Degrieck, Ludwig Cardon

    Diterbitkan 2014-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    The Effect of Injection Molding Temperature on the Morphology and Mechanical Properties of PP/PET Blends and Microfibrillar Composites

    The Effect of Injection Molding Temperature on the Morphology and Mechanical Properties of PP/PET Blends and Microfibrillar Composites oleh Maja Kuzmanović, Laurens Delva, Ludwig Cardon, Kim Ragaert

    Diterbitkan 2016-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering

    Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering oleh Nicolas Mys, Ruben Van De Sande, An Verberckmoes, Ludwig Cardon

    Diterbitkan 2016-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Lifting the Sustainability of Modified Pet-Based Multilayer Packaging Material with Enhanced Mechanical Recycling Potential and Processing

    Lifting the Sustainability of Modified Pet-Based Multilayer Packaging Material with Enhanced Mechanical Recycling Potential and Processing oleh Lynn Trossaert, Matthias De Vel, Ludwig Cardon, Mariya Edeleva

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    A Statistical Analysis on the Effect of Antioxidants on the Thermal-Oxidative Stability of Commercial Mass- and Emulsion-Polymerized ABS

    A Statistical Analysis on the Effect of Antioxidants on the Thermal-Oxidative Stability of Commercial Mass- and Emulsion-Polymerized ABS oleh Rudinei Fiorio, Dagmar R. D’hooge, Kim Ragaert, Ludwig Cardon

    Diterbitkan 2018-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Principles and Guidelines for In-Line Viscometry in Cereal Extrusion

    Principles and Guidelines for In-Line Viscometry in Cereal Extrusion oleh Elia Dalle Fratte, Dagmar R. D’hooge, Mia Eeckhout, Ludwig Cardon

    Diterbitkan 2022-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Impact of resin density and short-chain branching distribution on structural evolution and enhancement of tensile modulus of MDO-PE films

    Impact of resin density and short-chain branching distribution on structural evolution and enhancement of tensile modulus of MDO-PE films oleh Dixit Guleria, Shouren Ge, Ludwig Cardon, Sylvie Vervoort, Jaap den Doelder

    Diterbitkan 2024-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    New Approach to Optimize Mechanical Properties of the Immiscible Polypropylene/Poly (Ethylene Terephthalate) Blend: Effect of Shish-Kebab and Core-Shell Structure

    New Approach to Optimize Mechanical Properties of the Immiscible Polypropylene/Poly (Ethylene Terephthalate) Blend: Effect of Shish-Kebab and Core-Shell Structure oleh Yingxiong Wang, Dashan Mi, Laurens Delva, Ludwig Cardon, Jie Zhang, Kim Ragaert

    Diterbitkan 2018-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Combining Chromatographic, Rheological, and Mechanical Analysis to Study the Manufacturing Potential of Acrylic Blends into Polyacrylic Casts

    Combining Chromatographic, Rheological, and Mechanical Analysis to Study the Manufacturing Potential of Acrylic Blends into Polyacrylic Casts oleh Pablo Reyes, Mariya Edeleva, Dagmar R. D’hooge, Ludwig Cardon, Pieter Cornillie

    Diterbitkan 2021-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Effect of Matrix and Graphite Filler on Thermal Conductivity of Industrially Feasible Injection Molded Thermoplastic Composites

    Effect of Matrix and Graphite Filler on Thermal Conductivity of Industrially Feasible Injection Molded Thermoplastic Composites oleh Tom Wieme, Lingyan Duan, Nicolas Mys, Ludwig Cardon, Dagmar R. D’hooge

    Diterbitkan 2019-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Multicomponent Acrylic Formulation Design for Corrosion Casting with Controlled Mechanical Properties

    Multicomponent Acrylic Formulation Design for Corrosion Casting with Controlled Mechanical Properties oleh Pablo Reyes, Mariya Edeleva, Dagmar R. D’hooge, Ludwig Cardon, Pieter Cornillie

    Diterbitkan 2023-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling

    Molecular Pathways for Polymer Degradation during Conventional Processing, Additive Manufacturing, and Mechanical Recycling oleh Daniel V. A. Ceretti, Mariya Edeleva, Ludwig Cardon, Dagmar R. D’hooge

    Diterbitkan 2023-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Influence of Different Stabilization Systems and Multiple Ultraviolet A (UVA) Aging/Recycling Steps on Physicochemical, Mechanical, Colorimetric, and Thermal-Oxidative Properties of ABS

    Influence of Different Stabilization Systems and Multiple Ultraviolet A (UVA) Aging/Recycling Steps on Physicochemical, Mechanical, Colorimetric, and Thermal-Oxidative Properties o... oleh Rudinei Fiorio, Sara Villanueva Díez, Alberto Sánchez, Dagmar R. D’hooge, Ludwig Cardon

    Diterbitkan 2020-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Development of Crystalline Morphology and Its Relationship with Mechanical Properties of PP/PET Microfibrillar Composites Containing POE and POE-g-MA

    Development of Crystalline Morphology and Its Relationship with Mechanical Properties of PP/PET Microfibrillar Composites Containing POE and POE-g-MA oleh Maja Kuzmanović, Laurens Delva, Dashan Mi, Carla Isabel Martins, Ludwig Cardon, Kim Ragaert

    Diterbitkan 2018-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

    Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication oleh Sander Rijckaert, Lode Daelemans, Ludwig Cardon, Matthieu Boone, Wim Van Paepegem, Karen De Clerck

    Diterbitkan 2022-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Response-Surface-Methodology-Based Increasing of the Isotropic Thermal Conductivity of Polyethylene Composites Containing Multiple Fillers

    Response-Surface-Methodology-Based Increasing of the Isotropic Thermal Conductivity of Polyethylene Composites Containing Multiple Fillers oleh Hannelore Ohnmacht, Rudinei Fiorio, Tom Wieme, Dagmar R. D’hooge, Ludwig Cardon, Mariya Edeleva

    Diterbitkan 2022-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Designing Prepregnation and Fused Filament Fabrication Parameters for Recycled PP- and PA-Based Continuous Carbon Fiber Composites

    Designing Prepregnation and Fused Filament Fabrication Parameters for Recycled PP- and PA-Based Continuous Carbon Fiber Composites oleh Marah Baddour, Ruth Garcia-Campà, Pablo Reyes, Dagmar R. D’hooge, Ludwig Cardon, Mariya Edeleva

    Diterbitkan 2024-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication

    The Transferability and Design of Commercial Printer Settings in PLA/PBAT Fused Filament Fabrication oleh Sisi Wang, Dagmar R. D’hooge, Lode Daelemans, Hesheng Xia, Karen De Clerck, Ludwig Cardon

    Diterbitkan 2020-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Upgrading analytical models to predict the onset of degradation in selective laser sintering

    Upgrading analytical models to predict the onset of degradation in selective laser sintering oleh Ruben Vande Ryse, Mariya Edeleva, Aico Patoor, Frederik Pille, Dagmar R. D’hooge, Ludwig Cardon

    Diterbitkan 2024-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: