Hasil Pencarian - Luboš Kaščák

Perbaiki Hasil
  1. 1
    Research on the Influence of the AW 5754 Aluminum Alloy State Condition and Sheet Arrangements with AW 6082 Aluminum Alloy on the Forming Process and Strength of the ClinchRivet Joints

    Research on the Influence of the AW 5754 Aluminum Alloy State Condition and Sheet Arrangements with AW 6082 Aluminum Alloy on the Forming Process and Strength of the ClinchRivet Jo... oleh Jacek Mucha, Ľuboš Kaščák, Waldemar Witkowski

    Diterbitkan 2021-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Plastic Formed and Spot Welded Joints Strength of S350GD+Z Steel

    Plastic Formed and Spot Welded Joints Strength of S350GD+Z Steel oleh Ľuboš Kaščák, Jacek Mucha, Waldemar Witkowski

    Diterbitkan 2018-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS

    FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS oleh Emil Spišák, Janka Majerníková, Ľuboš Kaščák

    Diterbitkan 2016-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Influence of welding current in resistance spot welding on the properties of Zn coated steel DX51D

    Influence of welding current in resistance spot welding on the properties of Zn coated steel DX51D oleh Luboš Kaščák, Ján Viňáš, Rudolf Mišičko

    Diterbitkan 2016-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Modeling of Friction Phenomena of Ti-6Al-4V Sheets Based on Backward Elimination Regression and Multi-Layer Artificial Neural Networks

    Modeling of Friction Phenomena of Ti-6Al-4V Sheets Based on Backward Elimination Regression and Multi-Layer Artificial Neural Networks oleh Tomasz Trzepieciński, Marcin Szpunar, Ľuboš Kaščák

    Diterbitkan 2021-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Joining the High-Strength Steel Sheets Used in Car Body Production

    Joining the High-Strength Steel Sheets Used in Car Body Production oleh Ľuboš Kaščák, Denis Cmorej, Emil Spišák, Ján Slota

    Diterbitkan 2021-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    CLINCHING HOT-DIP GALVANIZED STEEL COMBINED WITH ALUMINIUM ALLOY

    CLINCHING HOT-DIP GALVANIZED STEEL COMBINED WITH ALUMINIUM ALLOY oleh Ľuboš Kaščák, Emil Spišák, René Kubík, Janka Majerníková

    Diterbitkan 2015-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    The Evaluation of Properties of Mechanically Clinched Joints Made of Ferrous and Non-Ferrous Materials

    The Evaluation of Properties of Mechanically Clinched Joints Made of Ferrous and Non-Ferrous Materials oleh Ľuboš Kaščák, Emil Spišák, René Kubík, Janka Majerníková

    Diterbitkan 2018-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups

    Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups oleh Janka Majerníková, Emil Spišák, Ľuboš Kaščák, Ján Slota

    Diterbitkan 2018-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    The Effect of the Machining Strategy on the Surface Accuracy When Milling with a Ball End Cutting Tool of the Aluminum Alloy AlCu4Mg

    The Effect of the Machining Strategy on the Surface Accuracy When Milling with a Ball End Cutting Tool of the Aluminum Alloy AlCu4Mg oleh Ján Varga, Teodor Tóth, Ľuboš Kaščák, Emil Spišák

    Diterbitkan 2022-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Simulation of 316L Stainless Steel Produced the Laser Powder Bed Fusion Process

    Simulation of 316L Stainless Steel Produced the Laser Powder Bed Fusion Process oleh Ľuboš Kaščák, Ján Varga, Jana Bidulská, Róbert Bidulský

    Diterbitkan 2023-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Central Composite Design Optimisation in Single Point Incremental Forming of Truncated Cones from Commercially Pure Titanium Grade 2 Sheet Metals

    Central Composite Design Optimisation in Single Point Incremental Forming of Truncated Cones from Commercially Pure Titanium Grade 2 Sheet Metals oleh Marcin Szpunar, Robert Ostrowski, Tomasz Trzepieciński, Ľuboš Kaščák

    Diterbitkan 2021-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    INFLUENCE OF CUTTING ON THE PROPERTIES OF CLIPPINGS FROM ELECTRICAL SHEETS

    INFLUENCE OF CUTTING ON THE PROPERTIES OF CLIPPINGS FROM ELECTRICAL SHEETS oleh Emil Spišák, Janka Majerníková, Ľuboš Kaščák, Ján Slota

    Diterbitkan 2015-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Research into Plastic Deformation of Double Reduced Sheets

    Research into Plastic Deformation of Double Reduced Sheets oleh Emil Spišák, Janka Majerníková, Emília Duľová Spišáková, Ľuboš Kaščák

    Diterbitkan 2018-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test

    Friction Behaviour of 6082-T6 Aluminium Alloy Sheets in a Strip Draw Tribological Test oleh Tomasz Trzepieciński, Ján Slota, Ľuboš Kaščák, Ivan Gajdoš, Marek Vojtko

    Diterbitkan 2023-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    FORMING ANALYSIS OF CONTINUOSLY ANNEALED, DOUBLE REDUCED STEEL SHEETS

    FORMING ANALYSIS OF CONTINUOSLY ANNEALED, DOUBLE REDUCED STEEL SHEETS oleh Emil Spišák, Janka Majerníková, Peter Mulidran, Ľuboš Kaščák, Ján Slota

    Diterbitkan 2018-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Wear of Shaped Surfaces of PVD Coated Dies for Clinching

    Wear of Shaped Surfaces of PVD Coated Dies for Clinching oleh Miroslav Džupon, Ľuboš Kaščák, Emil Spišák, René Kubík, Janka Majerníková

    Diterbitkan 2017-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    A Comparative Study of Hardfacing Deposits Using a Modified Tribological Testing Strategy

    A Comparative Study of Hardfacing Deposits Using a Modified Tribological Testing Strategy oleh Ján Slota, Andrzej Kubit, Ivan Gajdoš, Tomasz Trzepieciński, Ľuboš Kaščák

    Diterbitkan 2022-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    Evaluation of Non-Planar Tool Interaction in Milling of Shaped Surfaces Using a Copy Milling Cutter

    Evaluation of Non-Planar Tool Interaction in Milling of Shaped Surfaces Using a Copy Milling Cutter oleh Ján Varga, Štefan Kender, Ľuboš Kaščák, Vladimír Rohaľ, Emil Spišák

    Diterbitkan 2023-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Weight Factor as a Parameter for Optimal Part Orientation in the L-PBF Printing Process Using Numerical Simulation

    Weight Factor as a Parameter for Optimal Part Orientation in the L-PBF Printing Process Using Numerical Simulation oleh Ľuboš Kaščák, Ján Varga, Jana Bidulská, Róbert Bidulský, Diego Manfredi

    Diterbitkan 2024-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: