Hasil Pencarian - Ivan Petryshynets

Perbaiki Hasil
  1. 1
    Analysis of the Reasons for the Tearing of Strips of High-Strength Electrical Steels in Tandem Cold Rolling

    Analysis of the Reasons for the Tearing of Strips of High-Strength Electrical Steels in Tandem Cold Rolling oleh Ivan Petryshynets, František Kováč, Ladislav Falat

    Diterbitkan 2021-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    The Influence of the Third Element on Nano-Mechanical Properties of Iron Borides FeB and Fe<sub>2</sub>B Formed in Fe-B-X (X = C, Cr, Mn, V, W, Mn + V) Alloys

    The Influence of the Third Element on Nano-Mechanical Properties of Iron Borides FeB and Fe<sub>2</sub>B Formed in Fe-B-X (X = C, Cr, Mn, V, W, Mn + V) Alloys oleh Ivana Kirkovska, Viera Homolová, Ivan Petryshynets, Tamás Csanádi

    Diterbitkan 2020-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Effect of Preheating on the Mechanical Workability Improvement of High-Strength Electrical Steels during Tandem Cold Rolling

    Effect of Preheating on the Mechanical Workability Improvement of High-Strength Electrical Steels during Tandem Cold Rolling oleh František Kováč, Ivan Petryshynets, Róbert Kočiško, Patrik Petroušek, Ladislav Falat

    Diterbitkan 2023-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Improving the Magnetic Properties of Non-Oriented Electrical Steels by Secondary Recrystallization Using Dynamic Heating Conditions

    Improving the Magnetic Properties of Non-Oriented Electrical Steels by Secondary Recrystallization Using Dynamic Heating Conditions oleh Ivan Petryshynets, František Kováč, Branislav Petrov, Ladislav Falat, Viktor Puchý

    Diterbitkan 2019-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing

    Magnetic losses reduction in grain oriented silicon steel by pulse and continuous fiber laser processing oleh Ivan Petryshynets, František Kováč, Viktor Puchý, Martin Šebek, Ján Füzer, Peter Kollár

    Diterbitkan 2018-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Hydrogen Embrittlement Behavior of Plastically Pre-Strained and Cathodically Hydrogen-Charged 316H Grade Austenitic Stainless Steel

    Hydrogen Embrittlement Behavior of Plastically Pre-Strained and Cathodically Hydrogen-Charged 316H Grade Austenitic Stainless Steel oleh Ladislav Falat, Lucia Čiripová, Ivan Petryshynets, Ondrej Milkovič, Miroslav Džupon, Karol Kovaľ

    Diterbitkan 2022-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Evolution of Power Losses in Bending Rolled Fully Finished NO Electrical Steel Treated under Unconventional Annealing Conditions

    Evolution of Power Losses in Bending Rolled Fully Finished NO Electrical Steel Treated under Unconventional Annealing Conditions oleh Ivan Petryshynets, František Kováč, Ján Füzer, Ladislav Falat, Viktor Puchý, Peter Kollár

    Diterbitkan 2019-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    The Influence of the Degree of Tension and Compression of Aluminum on the Indentation Size Effect (ISE)

    The Influence of the Degree of Tension and Compression of Aluminum on the Indentation Size Effect (ISE) oleh Jozef Petrík, Peter Blaško, Ivan Petryshynets, Mária Mihaliková, Alena Pribulová, Peter Futáš

    Diterbitkan 2022-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Correlation between Cutting Clearance, Deformation Texture, and Magnetic Loss Prediction in Non-Oriented Electrical Steels

    Correlation between Cutting Clearance, Deformation Texture, and Magnetic Loss Prediction in Non-Oriented Electrical Steels oleh Ján Füzer, Samuel Dobák, Ivan Petryshynets, Peter Kollár, František Kováč, Ján Slota

    Diterbitkan 2021-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Influence of Noble Metals on the Microstructure and Properties of Biodegradable Mg-Nd-Zr Alloy

    Influence of Noble Metals on the Microstructure and Properties of Biodegradable Mg-Nd-Zr Alloy oleh Viktor Greshta, Vadim Shalomeev, Svitlana Bovkun, Ivan Petryshynets, Vasily Efremenko, Michail Brykov

    Diterbitkan 2023-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Microstructural Dependence of the Impact Toughness of TP316H Stainless Steel Exposed to Thermal Aging and Room-Temperature Electrolytic Hydrogenation

    Microstructural Dependence of the Impact Toughness of TP316H Stainless Steel Exposed to Thermal Aging and Room-Temperature Electrolytic Hydrogenation oleh Ladislav Falat, Lucia Čiripová, Viera Homolová, Miroslava Ďurčová, Ondrej Milkovič, Ivan Petryshynets, Róbert Džunda

    Diterbitkan 2024-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    The Effects of Electrochemical Hydrogen Charging on Charpy Impact Toughness and Dry Sliding Tribological Behavior of AISI 316H Stainless Steel

    The Effects of Electrochemical Hydrogen Charging on Charpy Impact Toughness and Dry Sliding Tribological Behavior of AISI 316H Stainless Steel oleh Ladislav Falat, Lucia Čiripová, Ondrej Petruš, Viktor Puchý, Ivan Petryshynets, Karol Kovaľ, Róbert Džunda

    Diterbitkan 2023-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Enhancing the Tensile Properties and Ductile-Brittle Transition Behavior of the EN S355 Grade Rolled Steel via Cost-Saving Processing Routes

    Enhancing the Tensile Properties and Ductile-Brittle Transition Behavior of the EN S355 Grade Rolled Steel via Cost-Saving Processing Routes oleh Vadym Zurnadzhy, Vera Stavrovskaia, Yuliia Chabak, Ivan Petryshynets, Bohdan Efremenko, Kaiming Wu, Vasily Efremenko, Michail Brykov

    Diterbitkan 2024-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Role of Quenching Temperature Selection in the Improvement of the Abrasive (Al<sub>2</sub>O<sub>3</sub>) Wear Resistance of Hybrid Multi-Component Cast Irons

    Role of Quenching Temperature Selection in the Improvement of the Abrasive (Al<sub>2</sub>O<sub>3</sub>) Wear Resistance of Hybrid Multi-Component Cast Irons oleh Yuliia Chabak, Vasily Efremenko, Ivan Petryshynets, Michail Golinskyi, Kazumichi Shimizu, Bohdan Efremenko, Vadim Kudin, Alexander Azarkhov

    Diterbitkan 2024-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Evaluation of the Microstructure, Tribological Characteristics, and Crack Behavior of a Chromium Carbide Coating Fabricated on Gray Cast Iron by Pulsed-Plasma Deposition

    Evaluation of the Microstructure, Tribological Characteristics, and Crack Behavior of a Chromium Carbide Coating Fabricated on Gray Cast Iron by Pulsed-Plasma Deposition oleh Yuliia Chabak, Vasily Efremenko, Miroslav Džupon, Kazumichi Shimizu, Victor Fedun, Kaiming Wu, Bohdan Efremenko, Ivan Petryshynets, Tatiana Pastukhova

    Diterbitkan 2021-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Increasing the Strength and Impact Toughness of Carbon Steel Using a Nanosized Eutectoid Resulting from Time-Controlled Quenching

    Increasing the Strength and Impact Toughness of Carbon Steel Using a Nanosized Eutectoid Resulting from Time-Controlled Quenching oleh Michail Brykov, Dariusz Mierzwiński, Vasily Efremenko, Vasyl’ Girzhon, Vadim Shalomeev, Oleksandr V. Shyrokov, Ivan Petryshynets, Olexandr Klymov, Oleksii Kapustyan

    Diterbitkan 2024-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Alternative Approach for the Intercritical Annealing of (Cr, Mo, V)-Alloyed TRIP-Assisted Steel before Austempering

    Alternative Approach for the Intercritical Annealing of (Cr, Mo, V)-Alloyed TRIP-Assisted Steel before Austempering oleh Vadym Zurnadzhy, Vasily Efremenko, Ivan Petryshynets, Manuele Dabalà, Mattia Franceschi, Kaiming Wu, František Kováč, Yuliia Chabak, Viktor Puchy, Michail Brykov

    Diterbitkan 2022-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Investigations of Abrasive Wear Behaviour of Hybrid High-Boron Multi-Component Alloys: Effect of Boron and Carbon Contents by the Factorial Design Method

    Investigations of Abrasive Wear Behaviour of Hybrid High-Boron Multi-Component Alloys: Effect of Boron and Carbon Contents by the Factorial Design Method oleh Yuliia Chabak, Ivan Petryshynets, Vasily Efremenko, Michail Golinskyi, Kazumichi Shimizu, Vadym Zurnadzhy, Ivan Sili, Hossam Halfa, Bohdan Efremenko, Viktor Puchy

    Diterbitkan 2023-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    STRUCTURE OF HIGH-CARBON STEEL AFTER WELDING WITH RAPID COOLING

    STRUCTURE OF HIGH-CARBON STEEL AFTER WELDING WITH RAPID COOLING oleh Yurii Kalinin, Michail Brykov, Ivan Petryshynets, Vasily Efremenko, Olaf Hesse, Maik Kunert, Michail Andrushchenko, Michail Osipov, Stanislav Berezhnyy, Oleg Bykovskiy

    Diterbitkan 2019-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Structural and Tribological Assessment of Biomedical 316 Stainless Steel Subjected to Pulsed-Plasma Surface Modification: Comparison of LPBF 3D Printing and Conventional Fabrication

    Structural and Tribological Assessment of Biomedical 316 Stainless Steel Subjected to Pulsed-Plasma Surface Modification: Comparison of LPBF 3D Printing and Conventional Fabricatio... oleh Yuliia Chabak, Bohdan Efremenko, Ivan Petryshynets, Vasily Efremenko, Angeliki G. Lekatou, Vadym Zurnadzhy, Iurii Bogomol, Victor Fedun, Karol Kovaľ, Tatiana Pastukhova

    Diterbitkan 2021-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: