Hasil Pencarian - Inam Ul Ahad

Perbaiki Hasil
  1. 1
    Response of a Zn2TiO4 Gas Sensor to Propanol at Room Temperature

    Response of a Zn2TiO4 Gas Sensor to Propanol at Room Temperature oleh Ibrahim Gaidan, Dermot Brabazon, Inam Ul Ahad

    Diterbitkan 2017-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning

    Fabrication of Silicon Carbide Nanoparticles Using Pulsed Laser Ablation in Liquid and Viscosity Optimization via Solvent Tuning oleh Saeid Heidarinassab, Anesu Nyabadza, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2024-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Effect of dimple pitch on thermal-hydraulic performance of tubes enhanced with ellipsoidal and teardrop dimples

    Effect of dimple pitch on thermal-hydraulic performance of tubes enhanced with ellipsoidal and teardrop dimples oleh Rizwan Sabir, Muhammad Mahabat Khan, Nadeem Ahmed Sheikh, Inam Ul Ahad

    Diterbitkan 2022-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Turbulence model study for aerodynamic analysis of the leading edge tubercle wing for low Reynolds number flows

    Turbulence model study for aerodynamic analysis of the leading edge tubercle wing for low Reynolds number flows oleh Intizar Ali, Tanweer Hussain, Imran Nazir Unar, Laveet Kumar, Inam Ul Ahad

    Diterbitkan 2024-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Effect of post-heat-treatment on thermal and physical characteristics of NiTi tubes produced via conventional drawing and laser powder bed fusion

    Effect of post-heat-treatment on thermal and physical characteristics of NiTi tubes produced via conventional drawing and laser powder bed fusion oleh Lehar Asip Khan, Corné Muilwijk, Hasan Ayub, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2023-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Comparing the surface hardness of mild steel processed with CO₂ and fibre lasers

    Comparing the surface hardness of mild steel processed with CO₂ and fibre lasers oleh Alan Harnett, Muhannad Ahmed Obeidi, Inam Ul Ahad, Ahmed R. Al-Hamaoy

    Diterbitkan 2023-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Additive Manufacturing of Bone Scaffolds Using PolyJet and Stereolithography Techniques

    Additive Manufacturing of Bone Scaffolds Using PolyJet and Stereolithography Techniques oleh Shummaila Rasheed, Waqas Akbar Lughmani, Muhannad Ahmed Obeidi, Dermot Brabazon, Inam Ul Ahad

    Diterbitkan 2021-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Analysis of nitinol actuator response under controlled conductive heating regimes

    Analysis of nitinol actuator response under controlled conductive heating regimes oleh Lehar Asip Khan, Eanna McCarthy, Corné Muilwijk, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2023-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Effect of powder and process parameters on in-situ alloying of nitinol during laser powder bed fusion

    Effect of powder and process parameters on in-situ alloying of nitinol during laser powder bed fusion oleh Declan Bourke, Karthikeyan Tamil Selvam, Muhannad Ahmed Obeidi, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2024-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Performance characteristics of PCM based thermal energy storage system for fluctuating waste heat sources

    Performance characteristics of PCM based thermal energy storage system for fluctuating waste heat sources oleh Faraz Kaiser Malik, Muhammad Mahabat Khan, Hassan Farooq Ahmed, Muhammad Irfan, Inam Ul Ahad

    Diterbitkan 2022-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    Energy and stress analysis of a hybrid photovoltaic thermal module

    Energy and stress analysis of a hybrid photovoltaic thermal module oleh Asad A. Naqvi, Ahsan Ahmed, Talha Bin Nadeem, Lehar Asip Khan, Inam Ul Ahad

    Diterbitkan 2023-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Laser Polishing of Additive Manufactured 316L Stainless Steel Synthesized by Selective Laser Melting

    Laser Polishing of Additive Manufactured 316L Stainless Steel Synthesized by Selective Laser Melting oleh Muhannad A. Obeidi, Eanna McCarthy, Barry O’Connell, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2019-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Investigation on Optical Absorption and Reflection of Carbon Nanotubes Mixed Copper Composites for Laser Sintering Process Improvement

    Investigation on Optical Absorption and Reflection of Carbon Nanotubes Mixed Copper Composites for Laser Sintering Process Improvement oleh Hasan Ayub, Lehar Asip Khan, Eanna McCarthy, Inam Ul Ahad, Karsten Fleischer, Dermot Brabazon

    Diterbitkan 2023-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Residual stresses prediction in transition metal nitrides sputtered coatings using artificial neural network and experimental evaluation of surface morphology

    Residual stresses prediction in transition metal nitrides sputtered coatings using artificial neural network and experimental evaluation of surface morphology oleh Abdullah, Rashid Ali, Waqas Akbar Lughmani, Syed Zameer Abbas, Muhammad Asif Khan, Inam Ul Ahad

    Diterbitkan 2024-09-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Investigating the morphology, hardness, and porosity of copper filters produced via Hydraulic Pressing

    Investigating the morphology, hardness, and porosity of copper filters produced via Hydraulic Pressing oleh Hasan Ayub, Lehar Asip Khan, Eanna McCarthy, Inam Ul Ahad, Karsten Fleischer, Dermot Brabazon

    Diterbitkan 2022-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Performance enhancement of latent energy storage system using effective designs of tubes and shell

    Performance enhancement of latent energy storage system using effective designs of tubes and shell oleh Rehan Qaiser, Muhammad Mahabat Khan, Hassan Farooq Ahmed, Faraz Kaiser Malik, Muhammad Irfan, Inam Ul Ahad

    Diterbitkan 2022-11-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    The Porosity Design and Deformation Behavior Analysis of Additively Manufactured Bone Scaffolds through Finite Element Modelling and Mechanical Property Investigations

    The Porosity Design and Deformation Behavior Analysis of Additively Manufactured Bone Scaffolds through Finite Element Modelling and Mechanical Property Investigations oleh Shummaila Rasheed, Waqas Akbar Lughmani, Muhammad Mahabat Khan, Dermot Brabazon, Muhannad Ahmed Obeidi, Inam Ul Ahad

    Diterbitkan 2023-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Anomaly detection in laser powder bed fusion using machine learning: A review

    Anomaly detection in laser powder bed fusion using machine learning: A review oleh Tayyaba Sahar, Muhammad Rauf, Ahmar Murtaza, Lehar Asip Khan, Hasan Ayub, Syed Muslim Jameel, Inam Ul Ahad

    Diterbitkan 2023-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    Steady-state and transient mechanical response analysis of superelastic nitinol lattice structures prior to additive manufacturing: An in-silico study

    Steady-state and transient mechanical response analysis of superelastic nitinol lattice structures prior to additive manufacturing: An in-silico study oleh Lehar Asip Khan, Hasan Ayub, Josiah Cherian Chekotu, Karthikeyan Tamilselvam, Corné Muilwijk, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2023-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Comparison of the porosity and mechanical performance of 316L stainless steel manufactured on different laser powder bed fusion metal additive manufacturing machines

    Comparison of the porosity and mechanical performance of 316L stainless steel manufactured on different laser powder bed fusion metal additive manufacturing machines oleh Muhannad Ahmed Obeidi, Sinéad M. Uí Mhurchadha, Ramesh Raghavendra, Alex Conway, Carlos Souto, David Tormey, Inam Ul Ahad, Dermot Brabazon

    Diterbitkan 2021-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: