Hasil Pencarian - Dae-Cheol Ko

Perbaiki Hasil
  1. 1
    Influence of the surface flaws in oil-tempered wires on the fatigue life of automotive engine valve springs

    Influence of the surface flaws in oil-tempered wires on the fatigue life of automotive engine valve springs oleh Dae-Cheol Ko, Nam-Sik Ahn, Kyung-Hun Lee

    Diterbitkan 2022-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  2. 2
    Effect of Weld Line Orientation on Formability of Tailor Welded Blank of 22MnB5 at Elevated Temperature

    Effect of Weld Line Orientation on Formability of Tailor Welded Blank of 22MnB5 at Elevated Temperature oleh Hong-Seok Choi, Dae-Cheol Ko, Byung-Min Kim

    Diterbitkan 2014-01-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  3. 3
    Advanced Forming Technology for Lightweight Components: From Theory to Application

    Advanced Forming Technology for Lightweight Components: From Theory to Application oleh Dae-Cheol Ko, Jianguo Lin, Jun Yanagimoto, Woo-Jin Song

    Diterbitkan 2014-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  4. 4
    Improvement of Weldment Properties by Hot Forming Quenching of Friction Stir Welded TWB Sheet

    Improvement of Weldment Properties by Hot Forming Quenching of Friction Stir Welded TWB Sheet oleh Dae-Hoon Ko, Jae-Hong Kim, Dae-Cheol Ko, Byung-Min Kim

    Diterbitkan 2014-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  5. 5
    Spring-In Prediction of CFRP Part Using Coupled Analysis of Forming and Cooling Processes in Stamping

    Spring-In Prediction of CFRP Part Using Coupled Analysis of Forming and Cooling Processes in Stamping oleh Jae-Chang Ryu, Chan-Joo Lee, Jin-Seok Jang, Dae-Cheol Ko

    Diterbitkan 2024-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  6. 6
    Development of a partition panel of an Al6061 sheet metal part for the improvement of formability and mechanical properties by hot forming quenching

    Development of a partition panel of an Al6061 sheet metal part for the improvement of formability and mechanical properties by hot forming quenching oleh Dae-Cheol Ko, Dae-Hoon Ko, Jae-Hong Kim, Joon-Hong Park

    Diterbitkan 2017-02-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  7. 7
    Hardness Prediction in Hot Stamping Process by Local Blank Heating Based on Quench Factor Analysis

    Hardness Prediction in Hot Stamping Process by Local Blank Heating Based on Quench Factor Analysis oleh Jae-Hong Kim, Dae-Cheol Ko, Seon-Bong Lee, Byung-Min Kim

    Diterbitkan 2018-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  8. 8
    Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part

    Prediction of the Delamination at the Steel and CFRP Interface of Hybrid Composite Part oleh Jun-Su Park, Jae-Hong Kim, Joon-Hong Park, Dae-Cheol Ko

    Diterbitkan 2021-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  9. 9
    Prediction of the Interface Behavior of a Steel/CFRP Hybrid Part Manufactured by Stamping

    Prediction of the Interface Behavior of a Steel/CFRP Hybrid Part Manufactured by Stamping oleh Jae-Chang Ryu, Chan-Joo Lee, Do-Hoon Shin, Dae-Cheol Ko

    Diterbitkan 2024-08-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  10. 10
    Analysis of Failure-Mode Dependent Joint Strength in Hole Clinching from the Aspects of Geometrical Interlocking Parameters

    Analysis of Failure-Mode Dependent Joint Strength in Hole Clinching from the Aspects of Geometrical Interlocking Parameters oleh Chan-Joo Lee, Guo Shen, Byung-Min Kim, Francesco Lambiase, Dae-Cheol Ko

    Diterbitkan 2018-12-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  11. 11
    A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures

    A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures oleh Francesco Lambiase, Silvia Ilaria Scipioni, Chan-Joo Lee, Dae-Cheol Ko, Fengchao Liu

    Diterbitkan 2021-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  12. 12
    Prediction of Bending Stiffness for Laminated CFRP and Its Application to Manufacturing of Roof Reinforcement

    Prediction of Bending Stiffness for Laminated CFRP and Its Application to Manufacturing of Roof Reinforcement oleh Jeong-Min Lee, Kyung-Hun Lee, Byung-Min Kim, Seung-Kook An, Dae-Cheol Ko

    Diterbitkan 2014-05-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  13. 13
    Novel Approach toward the Forming Process of CFRP Reinforcement with a Hot Stamped Part by Prepreg Compression Molding

    Novel Approach toward the Forming Process of CFRP Reinforcement with a Hot Stamped Part by Prepreg Compression Molding oleh Jae-Hong Kim, Yong-Hun Jung, Francesco Lambiase, Young-Hoon Moon, Dae-Cheol Ko

    Diterbitkan 2022-07-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  14. 14
    Design of an Intermediate Die for the Multi-Pass Shape Drawing Process

    Design of an Intermediate Die for the Multi-Pass Shape Drawing Process oleh Jeong-Hun Kim, Jeong-Hyun Park, Kwang-Seok Lee, Dae-Cheol Ko, Kyung-Hun Lee

    Diterbitkan 2022-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  15. 15
    Design of Center Pillar with Composite Reinforcements Using Hybrid Molding Method

    Design of Center Pillar with Composite Reinforcements Using Hybrid Molding Method oleh Ji-Heon Kang, Jae-Wook Lee, Jae-Hong Kim, Tae-Min Ahn, Dae-Cheol Ko

    Diterbitkan 2021-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  16. 16
    Development of Three-Dimensional Strip Profile Model for Thin-Foil Cold Rolling

    Development of Three-Dimensional Strip Profile Model for Thin-Foil Cold Rolling oleh Sang-Ho Lee, Kyung-Hun Lee, Dae-Cheol Ko, Seon-Bong Lee, Byung-Min Kim

    Diterbitkan 2014-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  17. 17
    Approximation Model Development and Dynamic Characteristic Analysis Based on Spindle Position of Machining Center

    Approximation Model Development and Dynamic Characteristic Analysis Based on Spindle Position of Machining Center oleh Ji-Wook Kim, Dong-Yul Kim, Hong-In Won, Yoo-Jeong Noh, Dae-Cheol Ko, Jin-Seok Jang

    Diterbitkan 2022-10-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  18. 18
    Feasibility of Reduced Ingot Hot-Top Height for the Cost-Effective Forging of Heavy Steel Ingots

    Feasibility of Reduced Ingot Hot-Top Height for the Cost-Effective Forging of Heavy Steel Ingots oleh Nam Yong Kim, Dae-Cheol Ko, Yangjin Kim, Sang Wook Han, Il Yeong Oh, Young Hoon Moon

    Diterbitkan 2020-06-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  19. 19
    Effect of a Multiple Reduction Die on the Residual Stress of Drawn Materials

    Effect of a Multiple Reduction Die on the Residual Stress of Drawn Materials oleh Jeong-Hun Kim, Chang-Hyun Baek, Sang-Kon Lee, Jong-Hun Kang, Joon-Hong Park, Dae-Cheol Ko

    Diterbitkan 2021-03-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:
  20. 20
    Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC440

    Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC440 oleh Seung-Hun Lee, Chan-Joo Lee, Kyung-Hun Lee, Jung-Min Lee, Byung-Min Kim, Dae-Cheol Ko

    Diterbitkan 2014-04-01
    Dapatkan teks lengkap
    Artikel
    Simpan ke Daftar
    Disimpan di:

Alat Pencarian: